Preliminary steps
▶
"Suspending BitLocker functionality" on page 75.
▶
If applicable, "Removing the front cover with lock" on page
48.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
▶
"Removing the air duct" on page 73.
Selecting the memory slot
▶
Choose the memory slot according to the configuration rules, see "Basic
information" on page 264.
Installing a memory module
Figure 183: Opening the securing clips
▶
Press the securing clips on both sides of the memory slot concerned
outward.
▶
If applicable, remove the dummy module.
Figure 184: Installing a memory module
Main memory
RX2530 M6 Upgrade and Maintenance Manual 271
To Next Page
Loading...
