Fujitsu PRIMERGY RX2530 M6 User Manual

CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
For more information on configurations of Optane PMem modules
and DDR4 DIMMs, see "Basic information" on page 264.
▶
Only for Optane PMem modules:
Check if the Optane PMem firmware is released for your BIOS
version.
Preliminary steps
▶
"Locating the defective server" on page 45.
▶
"Suspending BitLocker functionality" on page
75.
▶
If applicable, "Removing the front cover with lock" on page 48.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
▶
"Removing the air duct" on page 73.
▶
"Locating the defective component" on page 46.
Removing the defective memory module
▶
Remove the memory module, see "Removing a memory module" on
page 274.
Installing the new memory module
▶
Install the memory module, see "Installing a memory module" on page 271.
Main memory
RX2530 M6 Upgrade and Maintenance Manual 275

Fujitsu PRIMERGY RX2530 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX2530 M6
Category	Server
Language	English