Figure 273: Closing the cable clamp
▶
Close the cable clamp.
Concluding steps
▶
Install the riser module 1, see "Installing a riser module" on page
69.
▶
"Reassembling" on page 57
.
▶
"Connecting the power cord" on page 62.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
Software configuration
In order to install the ESXi to the Dual microSD 64GB Enterprise, the VMware
ESXi installer CD is required. To obtain the ESXi installer CD by purchasing the
OEM Media Kit, or downloading the ESXi Custom Image ISO file from the
VMware website and burn the image to the CD.
https://www.vmware.com/go/download-vsphere
Install the ESXi to the Dual microSD 64GB Enterprise by following the steps
below:
▶
Disconnect all storage devices from the server beside the Dual microSD
64GB Enterprise.
▶
Power on the server. Once the server has been started, then enter the BIOS
setup menu and select the DVD drive as primary boot device.
▶
Insert the CD into the DVD drive and reboot the server. The server will boot
from the installer CD.
System board and components
RX2530 M6 Upgrade and Maintenance Manual 375
To Next Page
Loading...
