4.6 Reassembling 57
4.6.1 Safety notes 57
4.6.2 Installing the top covers 57
4.6.3 Installing the server in the rack 58
4.6.4 Sliding the server into the rack 61
4.7 Connecting the power cord 62
4.7.1 Connecting the power cord (AC PSU) 62
4.7.2 Connecting the power cord (DC PSU) 63
4.8 Switching on the server 66
4.9 Installing the front cover with lock 66
4.10 Handling riser modules 68
4.10.1 Positions of riser modules 68
4.10.2 Removing a riser module 69
4.10.3 Installing a riser module 69
4.11 Handling chassis foams 70
4.11.1 Positions of chassis foams 70
4.11.2 Removing a chassis foam 71
4.11.3 Installing a chassis foam 72
4.12 Handling the air duct 73
4.12.1 Removing the air duct 73
4.12.2 Installing the air duct 74
5 Basic software procedures 75
5.1 Validation 75
5.2 Starting the maintenance task 75
5.2.1 Suspending BitLocker functionality 75
5.2.2 Disabling the boot watchdog 76
5.2.3 Removing backup and optical disk media 78
5.2.4 Verifying and configuring the backup software solution 78
5.2.5 Switching on the ID indicator 78
Content
RX2530 M6 Upgrade and Maintenance Manual
To Next Page
Loading...
