Viewing the SEL using the ServerView Operations Manager
▶
In ServerView Operations Manager Single System View
select
Maintenance from the Information / Operation menu.
▶
Under Maintenance select System Event Log.
▶
Select the message type(s) you want to display:
‐ Critical events
‐ Major events
‐ Minor events
‐ Informational events
Note on the Driver Monitor of the ServerView Operations Manager
The Driver Monitor view gives you an overview of the monitored
components as well as the associated events contained in the system
event log on the managed server.
Under Monitored Components
the monitored components are listed. If
a component has the status Warning or Error, you can select it in the
list and click Acknowledge. This confirms the event on the server side.
You may have to log on to the server beforehand. The status of the
component will then be reset to ok. To see the new status you must
refresh the Driver Monitor view with Refresh.
For more information on how to view and sort the SEL using ServerView
Operations Manager, see the "ServerView Operations Manager - Server
Management" user guide.
V
iewing the SEL using the iRMC S5 web interface
▶
Log in to the iRMC S5 web interface.
▶
Open the Logs menu.
▶
Click System Event Log to open the System Event Log page.
All events concerning the system are displayed in a table in the Event Log
Content group.
▶
Y
ou can sort the table based on a column using the arrows in the header
field.
Basic software procedures
90 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
Need help?
General