Fujitsu PRIMERGY RX4770 M6 User Manual

5.3.3 Updating expansion card firmware 89
5.3.4 Reconfiguring the backup software solution 91
5.3.5 Resetting the boot retry counter 91
5.3.6 Resetting the error status after replacing memory modules or
CPU 93
5.3.6.1 Resetting the error status after replacing CPUs 93
5.3.6.2 Resetting the error status after replacing memory modules 95
5.3.6.3 Locating the defective server 97
5.3.7 Enabling the boot watchdog 98
5.3.8 Enabling replaced components in the BIOS 99
5.3.9 Verifying the memory mode 99
5.3.10 Verifying the system time settings 100
5.3.11 Viewing and clearing the System Event Log (SEL) 101
5.3.12 Updating the NIC configuration file in a Linux and VMware
environment 104
5.3.13 Resuming BitLocker functionality 104
5.3.14 Performing a RAID array rebuild 105
5.3.15 Looking for MAC/WWN/GUID and SAS addresses 106
5.3.15.1 Basic information 106
5.3.15.2 Looking for the MAC address of a LAN controller 107
5.3.15.3 Looking for the WWN address of a fibre channel controller 108
5.3.15.4 Looking for the GUID address of an infiniband or Omni-Path
controller 109
5.3.15.5 Looking for SAS addresses of SAS controllers for external
devices 109
5.3.16 Using the Chassis ID Prom Tool 110
5.3.17 Configuring LAN teaming 112
5.3.18 Switching off the ID indicator 113
5.3.19 Performing a fan test 114
5.3.20 Updating the golden image 115
5.3.20.1 Updating the golden image for iRMC S5 firmware 115
5.3.20.2 Updating the golden image for BIOS firmware 117
6 Power supply unit (PSU)
119
6.1 Safety notes 119
6.2 Basic information 119
Content
Upgrade and Maintenance Manual RX4770 M6

Fujitsu PRIMERGY RX4770 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M6
Category	Server
Language	English