Concluding steps
▶
Install the two hot-plug PSUs, see "Installing a hot-plug PSU" on page 123
.
▶
Connect the front panel cable to the bottom system board, see "Installing
the COP" on page 320.
▶
"Installing the air duct 2 (bottom system board)" on page 72.
▶
"Installing the top system board carrier" on page 76.
▶
Install the riser module for PCIe slot 10 and PCIe slot 11, see "Installing a
riser module" on page 63.
▶
"Installing the fan cage" on page 66.
▶
"Installing the air duct 1 (top system board)" on page 71.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
▶
"Resuming BitLocker functionality" on page 104.
Power supply unit (PSU)
134 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
