Fujitsu PRIMERGY RX4770 M6 - Page 282

Preliminary steps
For CPU3 and CPU4 on the top system board:
▶
"Locating the defective server" on page 97.
▶
"Suspending BitLocker functionality" on page
81.
▶
If applicable, "Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 48.
▶
"Removing a riser module" on page 63.
▶
"Removing the air duct 1 (top system board)" on page 68.
For CPU1 and CPU2 on the bottom system board:
▶
"Locating the defective server" on page 97.
▶
"Suspending BitLocker functionality" on page 81.
▶
If applicable, "Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 48.
▶
"Removing a riser module" on page 63.
▶
"Removing the air duct 1 (top system board)" on page 68.
▶
"Removing the top system board carrier" on page 73.
▶
"Removing the air duct 2 (bottom system board)" on page 69.
Liquid cooling (LC)
282 Upgrade and Maintenance Manual RX4770 M6