▶
"Resetting the error status after replacing memory modules or CPU" on
page 93.
▶
"Enabling replaced components in the BIOS" on page 99
.
▶
"Resuming BitLocker functionality" on page 104.
Concluding steps
For CPU3 and CPU4 on the top system board:
▶
"Installing the air duct 1 (top system board)" on page 71.
▶
"Installing a riser module" on page 63.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
●
Restart your server.
●
As soon as the startup screen appears, press the
[F2] function key to
enter the BIOS.
●
If a password is assigned, enter the password and press [Enter].
●
Select the Exit menu.
●
Select Commit settings and Exit.
●
Verify that the Global Error indicator stops flashing.
▶
If applicable, "Installing the front cover with lock" on page
61.
▶
"Resetting the error status after replacing memory modules or CPU" on
page 93.
▶
"Enabling replaced components in the BIOS" on page
99.
Liquid cooling (LC)
296 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
Need help?
General