Fujitsu PRIMERGY RX4770 M6 User Manual

▶
Install the heat sink with the CPU from the defective top system board, see
"Installing the CPU and heat sink" on page 275
.
Concluding steps
▶
Install all memory modules, see "Installing memory modules" on page 243.
Ensure that you install each memory module again in the slot it was
located before the replacement.
CAUTION
In case of Optane PMem modules are not reinstalled in the right
slots, data can be lost!
▶
Install all memory dummy modules, see "Installing a dummy module" on
page 253
.
▶
"Installing the top system board carrier" on page 76.
▶
"Installing the air duct 1" on page 71.
▶
Install the riser modules, see "Installing a riser module" on page 63.
▶
"Reassembling" on page 53.
▶
Connect all external cables.
▶
"Connecting the power cord (AC PSU)" on page 59.
▶
"Switching on the server" on page 60.
System board and components
RX4770 M6 Upgrade and Maintenance Manual 377

Fujitsu PRIMERGY RX4770 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M6
Category	Server
Language	English