GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-108 Section 3-10 - Connectivity Setup
NOTE: The following steps are performed on the Network Computer.
1) On the network computer, access the Control Panel, as follows:
a.) Double-click on My Computer icon on desktop.
b.) Double-click on Control Panel icon.
2) Double-click on Network Connections icon.
3) Double-click on Local Area Connection icon.
The Local Area Connection Properties dialog box opens.
4) Select Internet Protocol (TCP/IP).
5) Click the Properties button.
Figure 3-113 Local Area Connection Properties
To Next Page
Loading...
