GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-168 Section 3-10 - Connectivity Setup
The currently-selected exams are now highlighted in the list and, as shown in Figure 3-182,
the cumulative size of the 3 studies is displayed below.
The three study management buttons are now as follows:
Delete Selected Patients - enabled
Copy Selected Patients and Move Selected Patients - remain disabled until at least one Study
has been selected and the Destination Path has been specified (providing the destination is
NOT read-only media [such as, CD/DVD-ROM]). Only when both these tasks have been
performed will these two buttons become enabled.
c.) To copy or move the selected exams, first click the Browse button and select the required
destination folder, then click the Copy Selected Patients or Move Selected Patients button
as appropriate.
(If necessary, click the Review Destination folder button to review the destination folder Patient
List).
During the copy or move operation, the relevant message and progress bar is displayed:
Note: When the selected studies have been copied to the destination folder, they will remain
listed in the MPEGVue Patient Manager Patient List. However, if they have been moved,
they will no longer be listed.
d.) To delete the selected exams, click the Delete Selected Patients button.
Figure 3-182 Exams Selected
To Next Page
Loading...
