GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-169
The user is prompted with the following warning message.
Click Yes to confirm the delete command.
Note: When the selected studies have been deleted, they will no longer be listed in the MPEGVue
Patient Manager Patient List.
3.) Manage Exams from E-vue, as follows:
a.) Make sure the Manage Exams from Evue tab is activated as shown in Figure 3-183.
The Patient List displays details - in table format - of all patient exams received via export from
E-Vue (Patient ID, Patient Name, Exam Date, etc.).
The current path information is displayed below the Patient List as well as number of studies,
cumulative size and amount of space available on the drive. By default, the destination path
Other Folder radio button is enabled.
b.) Select the required exam or exams - refer to step b on page 3-167.
c.) Copy or move the selected exam/s, as required - refer to step c on page 3-168.
d.) If required, delete the selected exam/s - refer to step d on page 3-168.
Figure 3-183 MPEGVue Patient Manager Window - Manage Exams from E-VueTab
To Next Page
Loading...
