GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
7-8 Section 7-2 - Diagnostics
In Figure 7-3 above, the selected report (Test signal amplitude, first harmonic) is displayed in the Report
window. When there is more than one report listed, the first report is displayed (by default).
Double-clicking on another report (for example, Test signal amplitude second harmonic), will evoke the
display of that report in the Report window as shown in the example in Figure 7-4 below.
Figure 7-3 View Log Dialog Box
To Next Page
Loading...
