GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
8-34 Section 8-3 - Internal Component Replacement Procedures
Figure 8-39 below.
6) Disconnect each of the two HVPS cables from their sockets on DC Power Supply, as shown in
Figure 8-40 below.
7) Gently lift one side of the P&M Board upwards and hinge it open to gain access to the RFI and TR32
Board assembly beneath, as shown in Figure 8-42 below.
(The RFI and TR32 Boards are seated together in the system as one unit).
Figure 8-39 Disconnecting the PCI Cable from the RFI Board
Figure 8-40 Disconnecting the DC Power Supply
Figure 8-41 Accessing the RFI and TR32 Boards
To Next Page
Loading...
