GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-69
IMPORTANT: Perform the next steps in the correct order. When securing the ECG Cable Protector, first fasten the rear
securing screw, then the front securing screw.
3.) Return and fasten the rear securing screw (Figure 8-80), then the front securing screw.
Figure 8-81 illustrates the ECG Cable Protector secured in position on the SafeLock Cart.
Figure 8-79 Placing the ECG Cable Protector in Position
CAUTION
When placing the ECG Cable Protector in position, take care not to damage the plastic.
Figure 8-80 Fastening the Rear Securing Screw
To Next Page
Loading...
