GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-103
17. Restore the settings as recorded under Preparation
section 8-5-1-1-1 on page 8-100.
Verify proper Connectivity functionality - refer to
Connectivity Setup on page 3 - 85.
18. Proceed to perform the following functionality tests:
• Software Configuration Checks on page 4 - 37
• Calibration Tests on page 7 - 25
• Full System Test on page 7 - 10
Table 8-5 Step-by-Step Vivid i n/ Vivid q N Software Upgrade Procedure (cont’d)
Step Instruction Expected Result
To Next Page
Loading...
