GE Vivid i n - Page 638

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
8-110 Section 8-5 - Software Loading
2) Press <Enter> to access Advanced Chipset Control (Figure 8-110).
3.) Set the parameters for Enable memory gap: as shown above in Figure 8-110.
4.) Press <Esc> to return to the Advanced menu home screen (Figure 8-109).
5.) Scroll to PCI/PNP Configuration and press <Enter> to open the PCI/PNP Configuration screen.
6.) Set the parameters in the PCI/PNP Configuration screen as shown above in Figure 8-111.
7.) Press <Esc> to return to the Advanced menu home screen (Figure 8-109).
Figure 8-110 BIOS Advanced Chipset Control Parameters
Figure 8-111 BIOS Advanced PCI/PNP Parameters