GE Vivid i n - Page 644

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
8-116 Section 8-5 - Software Loading
5.) Select the <Power> menu and press <Enter>.
6.) Set the parameters in the Power screen as shown above in Figure 8-120.
7.) Press <Esc> to return to the main BIOS screen (Figure 8-108 on page 8-108).
8.) Select the <Boot> menu and press <Enter>.
9.) Set the parameters in the Boot parameters screen as shown above in Figure 8-121.
10.)Press <Esc> to return to the main BIOS screen (Figure 8-108 on page 8-108).
Figure 8-120 BIOS Power Parameters
Figure 8-121 BIOS Boot Parameters