GRAUPNER mz-24 PRO Programming Manual

Micro-USB Connection
The Micro-USB port is found under the cover on
the back side of the mz-24 Pro HoTT transmitter:
Use this connection for software updates and date/
time settingfrom a desktop or laptop using any of the
Windows operating systems (XP, Vista, 7 - 10).
The included USB cable is plugged into this port and
the downloading procedure for obtaining software up-
dates through a computer is described in the software
package instructions.
The appropriate USB driver and software needed for
the computer to interface with this system can be
downloaded off our website www.graupnerusa.com.
After the required driver and software are installed, the
transmitter can be updated at any time using the USB
connection. The date and time can also set using the
USB connection.
Tip
To automatically receive email updates regarding import-
ant product information and software/firmware updates,
register all products on our website www.graupnerusa.
com.
Importing and Exporting Model Memories
Model memories can be backed up and copied to and
from the memory card and used interchangeably be-
tween transmitters of the same make or model. Refer
to the Import From SD Card and Export To SD Card
sections (pages 54-56) for more information on this
procedure.
Notices
• Certain special characters used in mod-
el names cannot be transferred to FAT and
FAT32file systemsdue to the specific restric-
tions of these file systems used by the mem-
ory card. Characters within such filenames
will be replaced by with atilde (~) during the
copying process.
• The model memories of the mz-24 and mz-
24 Pro transmittersare in principle compati-
ble with one another, HOWEVER:
In order to import from an SD card, the mod-
el memory must first be copied or moved to
a corresponding directory on a desktop or
laptop. For example, from Models\mz-24 to
Models\mz-24pro or vice versa. Refer to
the Import From SD Card section (page 54)
for more information.
After importing from an SD card,always check
each and every model function. In particular,
adapt the control and switch functionsto the
respective transmitter.
12 Connection on the back side

GRAUPNER mz-24 PRO Specifications

General

Brand	GRAUPNER
Model	mz-24 PRO
Category	Remote Control
Language	English