This menu has miscellaneous user preference set-
tings. Most notably is the Touch unlock option, al-
lowing users to change the key lock deactivation
from the standard method (simultaneously pushing
the ESC/ENT keys), to a lock code password. Users
can also change battery type and low-battery warning
voltage, voice and vario volume as well as the choice
to have a power-on melody play when turning on the
transmitter.
To adjust these settings, from the main display press
the SYSTEM menu gear icon (purple “S”) to bring up
the SYSTEM submenu screen:
000
000
000
000
mz
000%
000%
BATT TIME 00: 01: 23
MODELLNAME 1
M - 1
PHASE 1
000:00.0
000:00.0
4.2V
0:01:23
Press
From the SYSTEM submenu, press the Etc. Set icon:
BACK
SYSTEM
BASE
FUNCTION
ST mode
Etc. Set
Warning
Display
MP3
Stick Cali
Press
Etc. Set
Miscellaneous Transmitter Settings
Touch Unlock Line
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
LIPO
3.6V
ON
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
To set an individual password press the >> button in
the Touch unlock line:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
LIPO
3.6V
ON
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press
The red keyboard input menu opens:
BACK
CAPS
A B C D E F
G H I J K L
M
N
O P
Q
R
S
T
U
V W
X
Y
Z
<<
<
=
SPECIAL
NUM
Current Unlock Code
New Unlock Code
CLR
Trim lock
OFF
_
Refer to the Model Name section of the BASE sub-
menu Model Sel (page 42) for more information on
the red keyboard input menu.
Enter a password with a maximum of 14 characters.
The entered characters will appear in the blue input
field above the keyboard:
BACK
CAPS
A B C D E F
G H I J K L
M
N
O P
Q
R
S
T
U
V W
X
Y
Z
<<
<
=
SPECIAL
NUM
Current Unlock Code
New Unlock Code
CLR
Trim lock
OFF
ABCDEFGHIJKLMN
_
Press the < button to delete a single character, press
the << button to clear all characters in the blue input
field. Press the = button to transfer the characters to
the New Unlock Code field:
BACK
CAPS
A B C D E F
G H I J K L
M
N
O P
Q
R
S
T
U
V W
X
Y
Z
<<
<
=
SPECIAL
NUM
Current Unlock Code
New Unlock Code
CLR
Trim lock
OFF
ABCDEFGHIJKLMN
_
• Locking the Display
To lock the display (from anywhere except the
red keyboard input menu display) simultaneous-
ly press the ESC/ENT keys for about one second
until a short beep sounds. Release the keys. The
the display touch-function is locked; the transmit-
ter now will only react to the lateral buttons or con-
trol elements used to control the model.
Notice
Remember the password and/or write it down
and keep it in a safe place. Locked transmit-
ters will need to be sent to the Graupner Ser-
vice Center for reset.
• Locking the Display and Trim
Before or after setting a lock code, press the ON
/ OFF value field in Trim Lock column in the low-
er part of the display, to turn the option on or off:
212 System menu - ETC set
To Next Page
Loading...
