EasyManua.ls Logo

GRAUPNER mz-24 PRO - Warning

GRAUPNER mz-24 PRO
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use this menu to turn off or on the five visual and
acoustic alarm triggers. Typically, only the throttle
servo (CH1-POS) is actively monitored. Other option
settings in this menu include Throttle Hold, Throttle
Cut, Phase and Power OFF time.
To adjust these settings, from the main display press
the SYSTEM menu gear icon (purple “S”) to bring up
the SYSTEM submenu screen:
000
000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
MODELLNAME 1
M - 1
PHASE 1
000:00.0
000:00.0
4.2V
0:01:23
Press
From the SYSTEM submenu, press the Warning icon:
BACK
SYSTEM
BASE
FUNCTION
ST mode
Etc. Set
Warning
Display
MP3
Stick Cali
Press
Notice
These settings are model memory specific. Re-
set these options individually for each model
memory.
Warning
Model Memory Specific Warning Settings
Warning
BACK
Throttle Hold
Throttle Cut
Thro Position
Phase
Power OFF time
OFF
OFF
ON
OFF
OFF
To toggle between ON and OFF, press the value
field in the option line, as shown below:
Warning
BACK
Throttle Hold
Throttle Cut
Thro Position
Phase
Power OFF time
OFF
OFF
ON
OFF
OFF
Press
Warning
BACK
Throttle Hold
Throttle Cut
Thro Position
Phase
Power OFF time
ON
OFF
ON
OFF
OFF
The Throttle Cut line provides the REV option:
Warning
BACK
Throttle Hold
Throttle Cut
Thro Position
Phase
Power OFF time
ON
REV
ON
OFF
OFF
When the Throttle Cut is active, the REV option acti-
vates the option in reverse, as though the Throttle Cut
is switched off.
The Power OFF time option allows users to specify
how long the transmitter should wait before begin-
ning the shut-down process. The transmitter begins
the shut-down process after three minutes of inac-
tivity, and will give a warning before turning itself off.
Choose the time it takes to turn off after the warning
(in seconds and minutes): OFF, 30 s, 1m, 5m, 10m,
20m, 30m and 60m. Press the value field in the Pow-
er OFF time line to select:
Warning
BACK
Throttle Hold
Throttle Cut
Thro Position
Phase
Power OFF time
ON
REV
ON
OFF
1m
Press the BACK button at the top left to return to the
SYSTEM menu:
BACK
SYSTEM
BASE
FUNCTION
ST mode
Etc. Set
Warning
Display
MP3
Stick Cali
210 System menu - Warning

Table of Contents

Other manuals for GRAUPNER mz-24 PRO

Related product manuals