In the example below, the helicopter model named
“Starlet” is currently active. The model’s name is vis-
ible in the active Model Memory line 01 as well as the
name bar at the top of the screen. The model type
icon is displayed. In the example below, the helicop-
ter icon is visible:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
To view the model-type of other models saved in
memory, press to highlight any model name in the
Model Memory lines. For example, by pressing line
03 in the example below, the glider icon appears:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
Press
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
Note that “Starlet” remains in the name bar at the top
of the screen because it is still the currently active
model.
HoTT Synchronization Methods Setting
As mentioned in the section Starting the Receiv-
er (page 14): if both the receiver and the RF mod-
ule function are turned off, every model saved in the
Model Memory lines (01 - 30) can be switched from
Standard Memory Specific HoTT-Synchronization to
Transmitter Specific and vice-versa. Models saved
in memory with active HoTT-synchronization, also
known as Global Bound, have a yellow G to the right
of the model memory line.
MODEL NAME 1
NO yellow G to the right of
memory line = memory-spe-
cific bound
MODEL NAME 1
G
Yellow G to the right of mod-
el memory line = transmit-
ter-specific (global) bound
In the example below, Memory Lines 01, 02 and 03
are memory-specific HoTT-Synchronization; Memory
Lines 04, 05 and 06 have been switched to transmit-
ter-specific HoTT-Synchronisation:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
G
G
G
Changing the HoTT-Synchronization
Turn the transmitter's RF module off.
Press to highlight on model memory line to be
changed. For the example below, Model Memory 03
is being changed from Standard Memory to Global:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
G
G
G
Press
Once the line is selected the field is highlighted blue:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
G
G
G
Press the model-type icon:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
G
G
G
Press
A selection window will pop up with two options:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
G
G
G
Select
global
NO
39
Base menu - Model selection
To Next Page
Loading...
Need help?
General
