Most of the current gyro systems can be adjusted for
a smooth, proportional effect. Choose between two
different modes of action in the transmitter.
If the gyro has one of these options, the alternative
offset setting enables both the normal gyro gain and
"heading lock mode" as well as flying with maximum
stabilization in normal, slow fights within this selected
mode, and reducing the gyro gain in fast roundtrips
and aerobatics.
Switching phases to enter different settings in the
Gyro Gain line, with values between -125% and
+125%:
BACK
Gyro Gain
000%
Gyro Suppression
Governor RATE
Governor ACT
000%
INH
050%
RES
DEC
INC
PHASE 1
SERVO
Gyr/Gover
Based on the these phase-specific settings, the gyro
gain can also be smoothly varied with a control in the
OFFSET column in the BASE submenu CTL Set.
Governor ACT Line
BACK
Gyro Gain
000%
Gyro Suppression
Governor RATE
Governor ACT
000%
INH
050%
RES
DEC
INC
PHASE 1
SERVO
Gyr/Gover
This option is INH by default, meaning the control
channel 8 can be used without restriction.
To connect a governor to output 8, press the value
field of the Governor ACT line to turn it ON:
BACK
Gyro Gain
000%
Gyro Suppression
Governor RATE
Governor ACT
000%
ON
050%
RES
DEC
INC
PHASE 1
SERVO
Gyr/Gover
Press the value field again to turn the option off.
Governor RATE Line
After you have activated the Governor ACT option by
turning it ON, set the rotor speed to be maintained
by the governor in the Governor RATE line by adjust-
ing the percentage between 0% to 100%.
Press the value field of the line:
BACK
Gyro Gain
000%
Gyro Suppression
Governor RATE
Governor ACT
000%
ON
050%
RES
DEC
INC
PHASE 1
SERVO
Gyr/Gover
Press
The field highlights blue:
BACK
Gyro Gain
000%
Gyro Suppression
Governor RATE
Governor ACT
000%
ON
050%
RES
DEC
INC
PHASE 1
SERVO
Gyr/Gover
Press the INC or DEC buttons or the arrow keys
( pq ) to increase/decrease the value:
BACK
Gyro Gain
000%
Gyro Suppression
Governor RATE
Governor ACT
000%
ON
067%
RES
DEC
INC
PHASE 1
SERVO
Gyr/Gover
Press the RES button to reset the changed value
back to the default.
To save and exit, press the BACK button at the top
left of the display to return to the previous menu.
168 Function menu | Helicopter model - Gyro/Gover
To Next Page
Loading...
