GRAUPNER mz-24 PRO - Page 189

The field highlights blue:
BACK
RATE
RUDD >> AILE
+100%
INC
RES
DEC
A
+100%
B
PHASE 1
SERVO
Wing MIX
Press the INC or DEC buttons or the arrow keys
( pq ) to increase/decrease the value.
Use the same procedure to adjust the other values.
In the example below, RATE B now needs to be set
at +50%:
BACK
RATE
RUDD >> AILE
+050%
INC
RES
DEC
A
+050%
B
PHASE 1
SERVO
Wing MIX
Press the  RES button to reset the changed value
back to the default.
Tip
Bring up the servo monitor in one of three ways: press-
ing the SERVO button in the upper right corner of the
display, by simultaneously pushing both arrow keys
( pq ), or by pressing the BASE submenu Servo icon.
To exit the Servo display, press the BACK button or
push the ESC key to return to the previous menu.
To save and exit, press the BACK button at the top
left of the display to return to the previous menu:
BACK
RATE
RUDD >> AILE
+050%
INC
RES
DEC
A
+050%
B
PHASE 1
SERVO
Wing MIX
Press
The main Wing MIX display appears:
MIX.TYPE
RUDD >> AILE
AILE >> RUDD
RUDD >> ELEV
INH
INH
INH
>>
>>
ON
ON
ON
>>
ACT CTLSET
BACK
PHASE 1 Wing MIX
SERVO
AILE >> RUDD Line (Aileron >> Rudder)
The rudder moves to an adjustable degree when the
aileron is actuated. This can compensate for the neg-
ative torque in conjunction with Aileron Differentia-
tion (page 184) which smooths flight in curves. The
rudder remain separately controllable.
The setting range of ±150 % makes it possible to ap-
propriately adapt the deflection direction. This mixer
can be turned on and off so that the model can be
used exclusively via the ailerons. Turn mixer off with a
control (which cannot be independently reset), a con-
trol switch or a logical switch.
Tip
Normally, this mixer is adjusted so that the rudder ex-
tends on the side of aileron moving upward;an adjust-
ment of 50%is generally appropriate.
The adjustment should normally be symmetrical with
the neutral point of the aileron control stick.
To set the mixer, press the  >> button in the
AILE>>RUDD line:
MIX.TYPE
RUDD>> AILE
AILE >> RUDD
RUDD >> ELEV
ON
INH
INH
>>
>>
SW 6
ON
ON
>>
ACT CTLSET
BACK
PHASE 1 Wing MIX
SERVO
Press
The AILE>>RUDD setting display opens:
BACK
RATE
AIL >> RUDD
+100%
INC
RES
DEC
A
+100%
B
PHASE 1
SERVO
WING MIX
Press the desired value field. In the example below,
RATE A needs to be at +50%:
BACK
RATE
AIL >> RUDD
+100%
INC
RES
DEC
A
+100%
B
PHASE 1
SERVO
WING MIX
Press
189
Function menu | Airplane models - Airplane mixer