GRAUPNER mz-24 PRO - Page 215

tally increase/decrease the value in the field:
BACK
TX Volt Cali. Data
3.85V
33434
+10
–2
–10
+2
SAVE
Press the SAVE and BACK buttons save the settings
and exit to the main display menu.
Power on Melody Line
Use this setting to turn on or off the series of beeps
that plays when the transmitter is switched on.
Press the value field in the Power on Melody line:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
ON
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press
The field highlights blue:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
ON
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press the INC or DEC buttons or the arrow keys
( pq ) to toggle between OFF and ON:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
OFF
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press the  RES button to reset the changed value
back to the default.
Voice Volume Line
Use this setting to adjust the volume of the acoustic
signals and voice triggers.
Press the value field in the Voice Volume line:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
OFF
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press
The field highlights blue:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
OFF
03
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press the INC or DEC buttons or the arrow keys
( pq ) to increase/decrease the appropriate volume.
OFF = No Sound; the volume increases incrementally
up to 05 = Loudest:
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
OFF
05
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
To adjust the volume using a switch, press the NULL
field. An active menu will appear. Assign a switch by
moving the desired switch once active menu appears:
Press NO to cancel or CLR to return the switch to
the default value (NULL).
Vario Volume Line
Use this setting to adjust the volume of the Vario
announcements by following the same settings de-
scribed in the Voice Volume Line section (exception
being there is no switch assignment available):
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
OFF
05
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Press
Press the  RES button to reset the changed value
back to the default. Press BACK to return to the
SYSTEM menu.
Etc. Set
BACK
Battery type
Batt warning
Power on Melody
Voice Volume
NIMH
4.6V
OFF
INC
RES
DEC
Vario Volume
03
Touch unlock
>>
NULL
Select
CLR
NO
05
215
System menu - ETC set