GRAUPNER mz-24 PRO - Page 57

RES (Delete Model)
To reset an assigned model memory using the RES
button, open the BASE submenu Model Sel:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
Select the model memory to be deleted from the list.
In the example below, the Model Memory 02 "Beaver"
will be deleted. Press to highlight the name. The field
highlights blue:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
Press the RES button on the right side of the display:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
Press
A pop-up box appears:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
INITIALIZE
SURE
YES
NO
Press NO to terminate the action or press YES to
initialize:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
INITIALIZE
SURE
YES
NO
Press
The message "Please Wait!" appears while the infor-
mation is being deleted:
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
BEAVER
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
SPEICHER
INIT.?
J
N
PLEASE
WAIT!
Once the process is completed, the messages will
disappear and returns to the Model Sel display. Line
02 now reads the default title "MODEL NAME 2":
BACK
NEXT
01
STARLET
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
MODEL NAME 2
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
If the model currently in use has been initialized, an
additional pop-up box will appear:
BACK
NEXT
01
MODEL NAME 2
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
STARLET
MODEL NAME 2
GRAUBELE
ALPINA 3001
MODEL NAME 5
MODEL NAME 6
BIND N/A
OK
Fail Safe
not
set
Pressing OK opens BASE submenu TX ctl, where
the receiver can be re-bound. The message "FAIL
SAFE NOT SET" indicates the fail safe function will
need to be reset as well.
If no action is taken, the pop-up box will disappear
after a few seconds.
Notice
The Restore function cannot be reversed. All the
data in the selected model memory will be per-
manently deleted.
57
Base menu - Model selection