To retain the model type but change a model setting,
the same procedure is utilized. In the example be-
low, the wing type of the current model needs to be
changed from "1AILE" to "2AILE 2FLAP'. Press the
Wing Type button:
1A
AIRPLANE
T/TYPE
ELE.POWER
M/TYPE W/TYPE P/TYPE
NORMAL
NORMAL
BACK
Press
The WING Type menu will be displayed. Press to se-
lect the appropriate wing type:
2AILE 2FLAP
2AILE 4FLAP
4AILE 4FLAP
4AILE 2FLAP
1AILE
1AILE 1FLAP
2AILE 1FLAP
2AILE
WING Type
NORMAL
Continue selecting the appropriate icons for the addi-
tional fields displayed in the following menus, such as
Tail Type. The information display will appear when all
selectable fields are completed:
Press the ENT button at the lower right side of the
display to return to the BASE menu display:
2A2F
MOTOR
T/TYPE
ELE.POWER
M/TYPE W/TYPE P/TYPE
NORMAL
NORMAL
ENT
Press
Notices
• Options are limited depending on certain
model types. When selecting BOAT, the only
possible selection is between motor powered
or non-motor powered model type:
BOAT
POWER
M/TYPE P/TYPE
BACK
• When selecting CAR and DRONE, the only
possible selection is the model type:
COPTER
BACK
ENT
Press
61
Base menu - Model type
To Next Page
Loading...
