GRAUPNER mz-24 PRO - Page 73

AUTOLOG (Auto-Save to SD Card)
Press the ON/OFF  button at the bottom right of the
display while RF module is switched off to activate/
deactivate the automatic data logging save feature:
BACK
TX OUT SET
RF ON/OFF
RANGE TEST
BIND ON/OFF
SET
OFF
ON
12CH
RX1
RX2
DSC OUTPUT
SET
OFF
PPM18
NORMAL
RF-TYPE
99sec
OFF
AUTOLOG
TX ctl
Press
BACK
TX OUT SET
RF ON/OFF
RANGE TEST
BIND ON/OFF
SET
OFF
ON
12CH
RX1
RX2
DSC OUTPUT
SET
OFF
PPM18
NORMAL
RF TYPE
99sec
ON
AUTOLOG
TX ctl
As soon as the RF transmission is turned on, the log
data starts recording the information to the inserted
memory card and will stop recording as soon as the
transmitter or the RF module is switched off.
Notice
The AUTOLOG option remains switched ON or
OFF as long as the actual setting is not changed
while the RF module is switched off.
Touch the BACK button at the top left of the display
to leave this submenu and return to the BASE menu.
BACK
TX OUT SET
RF ON/OFF
RANGE TEST
BIND ON/OFF
SET
OFF
ON
12CH
RX1
RX2
DSC OUTPUT
SET
OFF
PPM18
NORMAL
RF TYPE
99sec
ON
AUTOLOG
TX ctl
Press
BACK
SYSTEM
BASE
FUNCTION
Model Sel
E.P.A
Model Type
REV/SUB
THR.CUT
Timer
TX ctl
Fail Safe
Trim Step
Servo
Out.Swap
CTL Set
Announce
Telemetry
73
Base menu - Transmitter setting