Touch NO to terminate the procedure.
Touch YES to start the servo test function. This func-
tion automatically controls the servos operating under
the assumption that the associated controls (starting
from the neutral position) will be simultaneously and
continuously moved back and forth between -100%
and +100% during the set period. All of the servos
that are active in the model memory move within the
set servo paths and servo path limits until the servo
test is stopped by touching the STOP button at the
bottom right corner of the screen:
1 2 3
4
5 6
7
8 9
10
11
12
–100%
–100%
–100%
–100%
–100%
–100%
–100%
–100%
–100%
–061%
+061%
+100%
BACK
TEST
PHASE 1
+4.0s
INC
RES
DEC
STOP
Servo
Press
88 Base menu - Servo monitor
To Next Page
Loading...
