Harmonic ProView 7100 - Page 148

Chapter 7 Device Configuring Using EMS Device Management
© 2012 Harmonic Inc. 148 ProView 7000 v.2.6, Rev. E
Related topics:
■ 7.10.7.1 Creating a Preset
■ 7.10.7.2 Activating a Preset
■ 7.10.7.3 Renaming a Preset
■ 7.10.7.4 Deleting a Preset
■ 7.10.7.5 Downloading Presets
■ 7.10.7.6 Uploading a Preset
7.10.7.1 Creating a Preset
Use the Create button to create a preset file from the current configuration. The file length
limit is 32 characters.
To create a preset file from the current configuration:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets.
The Presets Management dialog displays.
3. Click Create.
4. Enter a name for the preset.
5. Click OK.
7.10.7.2 Activating a Preset
Use the Activate button to activate a preset in the ProView 7000™. The device reboots when
you activate a preset.
To activate a preset:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Select a preset in the list.
4. Click Activate.
A confirmation dialog displays.
5. Click Yes.
7.10.7.3 Renaming a Preset
Use the Rename button to rename a preset. The file length limit is 32 characters.
To rename a preset:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Select a preset in the list.
4. Click Rename.