Harmonic ProView 7100 - Page 156

Chapter 7 Device Configuring Using EMS Device Properties
© 2012 Harmonic Inc. 156 ProView 7000 v.2.6, Rev. E
Platform
The Platform properties tab displays the following information on the ProView 7000™
platform:
■ Part number
■ Platform serial number
■ Hardware Revision
Figure 7–38: Device properties dialog – Hardware – Platform tab
Main Board
The Main Board Properties tab displays the following ProView 7000™ main board
parameters:
■ Main Board Serial number
■ Software version number
■ Main Board part number
■ Hardware Revision information
■ Main Board FPGA version number
■ Auxiliary FPGA version number
■ Remote sensor 1 and 2 temperature (in °C)
■ Internal sensor temperature (in °C)
■ Fan 1, 2, 3 and 4 speed (in rpm)