Harmonic ProView 7100 - Page 24

Chapter 2 Quick Start Configuring and Monitoring
© 2012 Harmonic Inc. 24 ProView 7000 v.2.6, Rev. E
13. Navigate Root > Decoding > Decoder (no.) > Configuration> Programs.
If you only have a single decoder then their is no Decoder (no.) menu.
The Programs menu displays a list of programs available on the input transport stream
and enables you to select the program to be decoded.
The screen displays the program name if the input stream provides an SDT table, the
program ID (decimal number), the program type (TV or Radio) and the program mode
(CAS/scrambled or FTA/free to air).
Only one program can be selected (radio button selection).
14. Navigate
Root > Decoding > Decoder (no.) > Configuration> Descrambling > CAM Selection.
If you only have a single decoder then their is no Decoder (no.) menu.
15. Select the CAM slot.
Name ID Type
Mode
1 ƒ BBC 4301 TV CAS
2 ‚ CNN 4302 TV CAS
3 ‚ IBA 2 4308 AUDIO FTA