Chapter 2
Spectrum system installation
Follow the installation procedures that apply to your Spectrum components.
Important background information about each component’s front and rear panel connectors, displays,
and indicators is available in the Hardware Reference sections of this guide. Familiarize yourself with this
information before connecting the components in a Spectrum system.
• Unpacking and inspecting the system
• Spectrum system environmental and power requirements
• Rack mounting instructions
• Installing Spectrum X components
• Installing MediaCenter components
• Installing I/O modules in the MediaPort 7002
• Installing MediaStore 7200 components
• Connecting the MediaCenter to the MediaStore 7200
• Connecting MediaDirectors and MediaStores using SAS
• Connecting MediaDirectors in an EFS configuration
• Connecting I/O modules to a MediaDirector 2252B or 2251B a MediaCenter 2200B
• Connecting to the Ethernet network
• Connecting to an automation system
• Connecting reference video
• Connecting audio and video I/O
• Connecting to an Emergency Alert System (EAS)
• Connecting AC power
• Powering up
• Verifying connectivity on a MediaPort 7000
• Setting the Spectrum X to "diskless" mode
• Powering down
• Managing and configuring your Spectrum system
18
To Next Page
Loading...
