Chapter 2: Spectrum system installation
Installing the Spectrum X drives
Use only Harmonic-supplied drives.
NOTE: When installing a drive, ensure that the adjacent drive is fully installed. Inserting
a drive carrier and attempting to lock its handle next to a partially installed carrier can
damage the partially installed carrier's shield spring and make it unusable.
To maintain proper system cooling, all externally accessible drive bays must be populated
with a drive carrier.
1. Unpack a disk drive.
2. Press the green button on the drive carrier to open the lever.
3. With the lever open, insert the drive assembly into the drive bay.
4. Push in the lever to lock the drive into place.
5. Repeat the previous steps for all remaining drives.
36
To Next Page
Loading...
