In this mode, each mail piece is manually placed on the Weighing Platform, and then
put into the mail path (or print a label).
•
Differential Weighing ( ) (optional)
This mode speeds up the weighing process and increases your efficiency: all the
mail pieces are stacked together on the Weighing Platform. Remove the pieces one
by one and put them into the mail path. The Mailing System calculates the postage
and prints the mail piece automatically.
You can leave all the mail pieces in a tray on the Weighing Platform: the Mailing
System will ask you to confirm printing for the last item removed (from the tray).
•
Differential Weighing Auto-Tape ( ) (optional)
This mode is identical to Differential Weighing except that the system automatically
prints the postage on labels.
Changing the Weighing Type
At start-up, the default weighing type is active.
See also
•
To change the default weighing mode as supervisor, see How to Change the Default
Weighing Type on page 162 .
•
To change the weighing type according to the type of process you want to run (see
Choosing a Weighing Type on page 63 ), follow the steps outlined below.
64
| Page 64 | feb-14-2014 12:06 |
3
Processing Mail
To Next Page
Loading...
