Fig. 75: ‘Manual mode
Temperature
drop’
Editing or deleting temperature drop
Fig. 76: ‘Manual mode
Temperature
drop
Editing’
1
[Edit temperature drop]
button
Item Designation Description/function
1
[Conrmation]
button After you have made all settings, you can conrm this with
this button.
2 Starting time Enter the starting time (date and time).
3 Duration You can dene the temperatur
e drop via a start and end
time or via the start time and specifying the duration of the
temperature drop here. The end time is then calculated
automatically.
4 End time Specify the end time of the temperature drop. The duration
is then adjusted accor
dingly.
5
[Cancel]
button If the
[Cancel]
button is pressed, the dialogue is closed and
you will go back to the previous dialogue. All changes will
be discarded.
6 Button
[Delete]
You can delete the temperature drop by pressing the
[Delete]
button.
7 Interval repetition Specify the repetition interval of the temperature drop.
The lines in the calendar mark the temperature drops. The dots at
the beginning and end of the line mark the start and end days of the
dr
op.
Temperature drop settings can only be made for the
future, not for the past.
To delete a temperature drop, proceed as follows:
1. Tap on the
[Edit temperature drop]
button.
To Next Page
Loading...
Need help?
General
