Hioki MEMORY HiLOGGER LR8450 User Manual

174
Conguring Alarms
> >
2
2
3
3
1
1
Congure each alarm channel ([ALM1] to [ALM8]).
1
Select the waveform display color.
× (OFF), 24 colors
2
Under [Filter] , select the number of data points.
The system will output an alarm if the alarm state continues for the set number of data points.
OFF

, 2, 5, 10, 20, 50, 100, 200, 500, 1000, User
If alarm sources include a wireless module’s channel, no lter may be applied during data recovering
processes.
(When [Filter] is set to [
User
])
Set the number of data points.
2

to 1000
3
Under [Comment], enter a comment (as necessary).
See “Text entry method” (p. 10).
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV