Honeywell ControlEdge 900 platform User Manual

Item Description
ControlEdge
UOC
ControlEdge 900 controllers running the Honeywell control execution
environment (CEE) configured with Experion Control Builder.
Special Terms
The following table describes the commonly used industry-wide and
Honeywell-specific terminology:
Terminology Description
AI Analog Input
AO Analog Output
CEE Control Execution Environment (Experion)
ControlEdge
900
A family of controller and I/O hardware which can be assembled to
create PLC or UOC systems.
ControlEdge
Builder
Software configuration tool for PLC.
Control
Builder
Experion Control Builder, configuration tool for UOC.
COTS Commercial Off the Shelf
CPM Control Processor Module (commonlyreferred to as the controller).
The ControlEdge 900 CPM, can be loaded with PLC firmware to
become the PLC or with UOC-CPM firmware to become the UOC-
CPM.
DCS Distributed Control System
DI Digital Input
DLR Device Level Ring
DO Digital Output
EPM Expansion Processor Module (used to connect multiple I/O racks to
the Control Processor Module)
Expansion
I/O rack
I/O rack with EPM installed
Ethernet/IP EtherNet/IP™ is a trademark protocol owned by ODVA.
10
Chapter 1 - About this guide

Honeywell ControlEdge 900 platform Specifications

General

Brand	Honeywell
Model	ControlEdge 900 platform
Category	Controller
Language	English