CHAPTER
1
ABOUT THIS GUIDE
Scope
This guide describes how to set up the ControlEdge 900 platform and
install UOC or PLC.
Revision history
Revision Date Description
A September
2016
Initial release of document
B November
2016
Update for PLC R130.2 Release including:
l Delete the Self-powered 3–wire transmitter for UIO AI,
and updated Self-powered 4-wire transmitter for UIO AI.
l Add 900RTP-H1xx RTP Cable
l Add MOXA Unmanaged Ethernet Switch EDS-308 and
EDS-316-MM-SC.
C April 2017 Update for the PLC R140 Release including:
l Five new I/O modules
l Add new RTP and RTP Cables
l New Terminal Blocks
l New accessory parts
D June 2017 Update for PLC. Adding the following items:
l Add UIO wiring limitation and hardware version
comparison
l Add RTP dimension for installing
E September
2017
Added UOC information (for Experion R505 release)
F November Update for UOC network topologies
7
To Next Page
Loading...