181
Approved Standards for Division 2/Zone 2
Hazardous Location
US Approval Standards
Item Number
Issue
Date
Electrical Equipment for Use in Hazardous (Classified)
Locations, General Requirements
FM 3600 2011
Non-incendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Division 1 and 2, Hazardous
(Classified) Locations
FM 3611 2004
Electrical and Electronic Test, Measuring and Process Control
Equipment
FM 3810 2005
Safety Requirements For Electrical Equipment For
Measurement, Control, And Laboratory Use - Part 1: General
Requirements
UL Std.
No.61010-1
(3rd Edition)
2012
Nonincendive electrical equipment for use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 hazardous
(classified) locations
UL 12.12.01 ā
Ninth Edition
2017
Canadian Standards
Title Number
Issue
Date
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 1: General
requirements
CAN/CSA-
C22.2
No.61010-1-
12
2012
Nonincendive electrical equipment for use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 hazardous
(classified) locations
CSA Standard
C22.2 No.213-
2017
2017
Chapter 9 - Special Condition of Use and Approved Standards
To Next Page
Loading...