Honeywell HC900 User Manual

Specifications - Fiber Optics Recommendations
204 HC900 Process Controller Installation and User Guide Revision 19
06/14
Fiber Optics Recommendations
Honeywell recommends that you use the following equipment for extended distances:
Table 43 – Fiber Optics Equipment Recommendations
Ethernet Switch Moxa Unmanaged Ethernet Switch model EDS-308-MM-SC with
(6) 10/100 Ethernet ports, (2) multi-mode fiber ports with SC
Connectors (require 24VDC power)
Converter Moxa Media Converter model IMC-101-M-SC with (1)
10/100BaseT(X) to 100BaseFX multi-mode fiber port with SC
connectors (require 24VDC power)
Fiber Cable Multi-mode, Duplex, 62.5/125 with SC connectors on both ends
Copper Ethernet Cable Shielded Cat5 Ethernet cable
FO Connector SC Type
Figure 90 and
Figure 91 are examples of Extended Distance configurations
Figure 90 – Extended Distance Example #1

Honeywell HC900 Specifications

General

Series	HC900
Redundancy	Optional
Programming Language	Function Block Diagram, Ladder Logic, Structured Text
Inputs	Analog, Digital
Outputs	Analog, Digital, Relay
Display	Optional
Control	PID, Advanced Control
Power Supply	24V DC or 100-240V AC
Storage Temperature	-40°C to 85°C
Humidity	5% to 95% non-condensing
Communication Protocols	Modbus, Ethernet