Honeywell HC900 User Manual

iv HC900 Process Controller Installation and User Guide Revision 19
06/14
About This Document
Abstract
This document provides descriptions and procedures for the installation, operation and maintenance of the HC900
Process Controller hardware.
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
Document Title ID #
HC900 Process Controller Technical Overview Specification 51-52-03-31
HC900 Module Specification 51-52-03-41
HC900 Controlware Specification 51-52-03-42
Designer Software Specification 51-52-03-43
HC900 Process Controller Operator Interface User Guide 51-52-25-108
HC900 Designer Software User Guide 51-52-25-110
HC900 Process Control Utilities User Guide 51-52-25-126
HC900 Process Controller Function Block Reference Guide 51-52-25-109
HC900 Process Controller Communications User Guide 51-52-25-111
HC900 Controller Redundancy Overview & System Operation 51-52-25-133
900 Control Station For use with HC900 Process Controller 51-52-25-148
Station Designer Software manual 51-52-25-149
Revision Information
Document Name
This manual … 51-52-25-107 HC900 Controller
Installation and User Manual
Revision Number Publication Date
SIL updates/Shielded cable added/CE and ATEX updates Rev.19 June 2014

Honeywell HC900 Specifications

General

Series	HC900
Redundancy	Optional
Programming Language	Function Block Diagram, Ladder Logic, Structured Text
Inputs	Analog, Digital
Outputs	Analog, Digital, Relay
Display	Optional
Control	PID, Advanced Control
Power Supply	24V DC or 100-240V AC
Storage Temperature	-40°C to 85°C
Humidity	5% to 95% non-condensing
Communication Protocols	Modbus, Ethernet