Rack Installation - Overview
Revision 19 HC900 Process Controller Installation and User Guide 57
06/14
Step Procedure Reference
3 Install (or verify correct installation of) enclosures (“closets”)
for networking devices:
See Pre-installation planning
sections.
Note:Some networking devices
may share enclosures with
HC900 Controller components.
4 Install (or verify correct installation of):
• External disconnect switches
• Fuses
at the power source associated with input sensor or output
devices for I/O modules.
See I/O Module Installation
and Wiring on page 66.
5
Arrange and organize items to be installed at or near
enclosures.
To Next Page
Loading...
