HP 8360 B Series - Delta Mkr Ref

Delta Marker
Programming Codes
SCPI: MARKer[n]:DELTa? <num>, <num>
Analyzer: MD1 function on, MD0 function off
See Also (-1
“Marker Operation” in Chapter 1
“Programming Typical Measurements” in Chapter 1
Delta Mkr Ref
Function Group
MARKER
Menu Map 3
Description
This softkey displays the five markers available as the delta marker
reference. The delta marker frequency is calculated using the
equation:
f(ym=fm--frmf
where f, is the frequency of the active marker and fmref is the
frequency of the reference marker.
Programming Codes
SCPI: MARKer:REFerenc <marker number>
Analyzer: MD1 function on, MD0 function off.
See Also
Delta Marker
“Marker Operation” in Chapter 1
“Programming Typical Measurements” in Chapter 1
D-6 Operating and Programming Reference