HP 8360 B Series User Manual

Pulse Rate
Pulse Period
Function Group (MOD)
Menu Map 4
Description
This softkey lets you set a value for the internal pulse generator’s
pulse period. The range of acceptable values is from 2 ps to 65.5 ms.
The factory preset value is 2 ms. When this feature is active, its
current value is displayed in the active entry area.
Programming Codes
SCPI: PULSe:TIMing:PERiod <num>[time suffix] or
MAXimumlMINimum
Analyzer: NONE
See Also
(ALC),m, Pulse Menu
Pulse Rate
Function Group
Menu Map
Description
Programming Codes
See Also
MODULATION
4
This softkey lets you set the internal pulse generators pulse repetition
rate. The repetition rate can vary from 15.26 Hz to 500 kHz. The
factory preset value is 500 Hz. When this feature is active, its current
value is displayed in the active entry area.
SCPI: PULse:FREQ
uency
<num>[freq suffix] or
MAXimumIMINimum
Analyzer: NONE
(ALC),m, Pulse Menu
Operating and Programming Reference P-21

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English