General
Environmental
Warmup Time
Power Requirements
Weight
&
Dimensions
Adapters Supplied
Operating Temperature Range: 0 to 55
“C
Altitude: Up to 4572 meters
Humidity: 5 to 80% relative at j-25 to 40
“C
Enclosure Protection:
IP20,
according to IEC 529
This product is designed for use in INSTALLATION CATEGORY II
and POLLUTION DEGREE 2, per IEC 1010 and 664 respectively.
EMC: Within limits of CISPR Pub. 11/1990 Group 1, Class A, and
Mil-Std-461C Part 7 RE02.
Operation: Requires 30 minute warmup from cold start at 0 to
55 “C. Internal temperature equilibrium reached over 2 hour warmup
at stable ambient temperature.
F’requency
Reference: Reference time base is kept at operating
temperature with the instrument connected to AC power.
Instruments disconnected from AC power for more than 24 hours
require 30 days to achieve time base aging specification. Instruments
disconnected from AC power for less than 24 hours require 24 hours
to achieve time base aging specification.
48 to 66 Hz; 115 volts
(+lO/-25%)
or 230 volts
(+lO/-15%);
400
VA maximum (30 VA in standby)
Net Weight: 27 kg (60 lb)
Shipping Weight: 36 kg (80 lb)
Dimensions: 178 H x 425 W x 648 mm D (7.0 x 16.75 x 25.5 inches)
HP
83620B,
HP
83622B,
HP 83623B, HP 83624B, HP 83630B
Type-N (female)
-
3.5 mm (female)
Part number
1250-
1745
3.5 mm (female)
-
3.5 mm (female)
Part number 5061-5311
HP
83640B,
HP 83650B
2.4 mm (female)
-
2.92 (female)
Part number 1250-2187
2.4 mm (female)
-
2.4 mm (female)
Part number 1250-2188
2c-14
Specifications
To Next Page
Loading...
Need help?
General
