Operator’s
Check
and
Routine
Maintenance
WARNING
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
Operator’s Checks
Service Information
The local operator’s check (front panel use) allows the operator to
make a quick check of the main swept signal generator functions prior
to use.
For delete front panel options of the HP 8360 B-Series, use the
“Front Panel Emulator Software” to perform an operator’s check.
If the swept signal generator requires service and the routine
maintenance procedures do not clear the problem, contact a qualified
service technician. A list of HP Sales and Support Offices is provided
behind the “PREFACE” tab at the front of this manual. To help the
service technician identify the problem quickly, fill out and attach a
service repair tag. Service repair tags are provided at the end of this
chapter. If a self test error occurs, note the name of the failure and
the referenced paragraph number in the failure symptoms/special
control settings section of the tag. Provide any information that you
feel is imnortant to recreate the failure.
Operator’s Check/Routine Maintenance
4-l