FM
On/Off
Int
Function Group
INIOD)
Menu Map
4
Description
This
softkey
(Option 002 only) activates the internal frequency
modulation mode. No external source is needed.
When internal FM is in effect, the parameters are controlled by the
following soft keys:
Internal FM Rate Internal FM Deviation
FM Coupling
IOOkHz
FM Coupling DC Waveform Menu.
The
swept signal generator is factory preset to a 1 MHz rate, 1 MHz
deviation, and sine wave parameters.
An asterisk next to the key label indicates that internal FM is active
and FM is displayed on the message line.
Programming Codes
SCPI:
FM:SOURce
INTernal
FM:STATe
ONIOFF
Analyzer: NONE
See
Also
(MOD_),
also see “FM” and “Modulation”.
Operating and Programming Reference F-15
To Next Page
Loading...
