HP 8360 B Series User Manual

Meter On/Off FM
Function Group
m
Menu Map
4
Description
This softkey (Option 002 only) lets you display the frequency
deviation produced by the externally-generated frequency
modulation.
Programming Codes
See Also
SCPI: MEASure:FM?
Analyzer: NONE
m), also see “FM” and “Modulation”.
(MOD]
Function Group
MENU SELECT
Menu Map 4
Description
This hardkey allows access to the modulation functions. The
following types of modulation are available:
AM Amplitude modulation is accepted from an external
source at the AM connector. The AM can be
scaled either linearly or exponentially. Swept signal
generators with Option 002 also have the capability
of internally synthesizing amplitude modulation in
sine, square, triangle, ramp, or noise waveforms.
Deep AM (a distortion reduction mode) can be
selected for use when operating at a deep amplitude
modulation level.
FM Frequency modulation is accepted from an external
source at the FM connector. The FM can be either
AC-or DC-coupled. Swept signal generators with
Option 002 also have the capability of internally
synthesizing frequency modulation in sine, square,
triangle, ramp, or noise waveforms.
M-10 Operating and Programming Reference

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English